These graphs show the value, tons and ton-miles for the years 1997, 2002, 2007, 2012, and 2017. They are filterable by commodity and mode

The goal of the SHRP 2 Project L33 Validation of Urban Freeway Models was to assess and enhance the predictive travel time reliability models developed in the SHRP 2 Project L03, Analytic Procedures for Determining the Impacts of Reliability Mitigation Strategies. SHRP 2 Project L03, which concluded in 2010, developed two categories of reliability models to be used for the estimation or prediction of travel time reliability within planning, programming, and systems management contexts: data-rich and data-poor models. The objectives of Project L33 were the following: • The first was to validate the most important models – the “Data Poor” and “Data Rich” models with new datasets. • The second objective was to assess the validation outcomes to recommend potential enhancements. • The third was to explore enhancements and develop a final set of predictive equations. • The fourth was to validate the enhanced models. • The last was to develop a clear set of application guidelines for practitioner use of the project outputs. The datasets in these 5 zip files are in support of SHRP 2 Report S2-L33-RW-1, Validation of Urban Freeway Models, https://rosap.ntl.bts.gov/view/dot/3604 The 5 zip files contain a total of 60 comma separated value (.csv) files. The compressed zip files total 3.8 GB in size. The files have been uploaded as-is; no further documentation was supplied. These files can be unzipped using any zip compression/decompression software. The files can be read in any simple text editor. [software requirements] Note: Data files larger than 1GB each. Direct data download links: L03-01: https://doi.org/10.21949/1500858 L03-02: https://doi.org/10.21949/1500868 L03-03: https://doi.org/10.21949/1500869 L03-04: https://doi.org/10.21949/1500870 L03-05: https://doi.org/10.21949/1500871

This project focused specifically on design treatments that can be used to improve travel time reliability. The objectives of this research were to (1) identify the full range of possible roadway design features used by transportation agencies to improve travel time reliability and reduce delays from key causes of nonrecurrent congestion, (2) assess their costs and operational and safety effectiveness, and (3) provide recommendations for their use and eventual incorporation into appropriate design guides. This research generated two companion products that allow transportation agencies and professionals to apply these research findings effectively in daily practice. These products are the Design Guide for Addressing Nonrecurrent Congestion, which is a catalogue of the design elements and their associated use information, and the Analysis Tool for Design Treatments to Address Nonrecurring Congestion, which is a tool to execute the various analysis procedures and models to measure the effectiveness of a design element on travel time reliability. This zip file contains comma separated value (.csv) files of data to support SHRP 2 Report S2-L07-RR-1, Identification and Evaluation of the Cost-Effectiveness of Highway Design Features to Reduce Nonrecurrent Congestion, https://rosap.ntl.bts.gov/view/dot/4040 The compressed zip file is 12 MB. These files can be unzipped using any zip compression/decompression software. The .csv files can be read with any basic text editor.

As our highway infrastructure continues to age, there is the imperative need to renew the entire network while keeping it operational. Moreover, many highway corridors and regional networks are becoming ever more congested. As a result there is an increasing need to (1) examine various construction alternatives within those corridors and networks to determine the potential disruption and/or benefit that alternative renewal activities may have over time, and (2) examine the effect of constructing multiple corridors concurrently or in sequence. Without an evaluation of the various construction alternatives during the program and project development process, negative impacts on the traveling public and the local communities may increase dramatically. The research on Project R11 focused on answering the following related questions: • How should highway reconstruction projects be set in space and time to minimize disruption to the traveling public, businesses, and adjacent communities? • What is the traffic impact on the regional network when multiple corridors are being considered for renewal? • Are there strategies that may minimize impacts on the corridor and/or regional network? This zip file contains comma separated value (.csv) files of data to support SHRP 2 report S2-R11-RW-1, Strategic approaches at the corridor and network level to minimize disruption from the renewal process. Zip size is 0.46 MB. Files were accessed in Microsoft Excel 2016. Data will be preserved as is. To view the publication see: https://rosap.ntl.bts.gov/view/dot/3612

"SHRP 2 initiated the L38 project to pilot test products from five of the program’s completed projects. The products support reliability estimation and use based on data analyses, analytical techniques, and decision-making framework. The L38 project has two main objectives: (1) to assist agencies in using travel time reliability as a measure in their business practices and (2) to receive feedback from the project research teams on the applicability and usefulness of the products tested, along with their suggested possible refinements. SHRP 2 selected four teams from California, Minnesota, Florida, and Washington. Project L38C tested elements from Projects L02, L05, L07, and L08. Project L02 identified methods to collect, archive, and integrate required data for reliability estimation and methods for analyzing and visualizing the causes of unreliability based on the collected data. Projects L07 and L08 produced analytical techniques and tools for estimating reliability based on developed models and allowing the estimation of reliability and the impacts on reliability of alternative mitigating strategies. Project L05 provided guidance regarding how to use reliability assessments to support the business processes of transportation agencies. The datasets in this zip file, which is 7.83 MB in size, support of SHRP 2 reliability project L38C, "Pilot testing of SHRP 2 reliability data and analytical products: Florida." The accompanying report can be accessed at the following URL: https://rosap.ntl.bts.gov/view/dot/3609 There are 12 datasets in this zip file, including 2 Microsoft Excel worksheets (XLSX) and 10 Comma Separated Values (CSV) files. The Microsoft Excel worksheets can be opened using the 2010 and 2016 versions of Microsoft Word, the CSV files can be opened using most text editors.

These Charts show the value, tons and ton-miles using each state as an origin and destination. The Years available are 1997-2017