16 Results
filtered by...
Filter
Tags > county
Sort
Sort by Most Relevant
Filter
Categories
- Administrative
- Automobiles
- Aviation
- Bicycles and Pedestrians
- Maritime and Waterways
- Pipelines and Hazmat
- Public Transit
- Railroads
- Research and Statistics
- Roadways and Bridges
- Transit
- Trucking and Motorcoaches
Tags
- county
- access
- accidents
- active transportation and demand management (atdm)
- air quality
- air worthiness
- ams chicago
- ams dallas
- ams pasadena
- ams san diego
- ams san mateo
- arp act
- arterial management
- before and after studies
- benefit cost analysis
- border crossing
- bridge
- buses
- busstops
- canada
- capital stock
- case studies
- category
- commercial tonnage
- condition
- congestion
- connectivity
- construction
- construction cost
- construction costs
- containers
- coronavirus
- cost
- cost effectiveness
- cost per vehicle mile
- crrsa act
- data files
- data quality
- data sharing
- datasets
- decision support systems
- definitions
- design
- disasters and emergency operations
- dynamic mobility applications (dma)
- earnings
- economic activity
- economy
- emergency communication systems
- emergency funding
- energy
- enplanements
- environment
- evaluation and assessment
- expenditures
- extent
- federal government
- fhwa
- final demand
- financing
- forecasting
- formula grants
- freight transportation services index
- fuel
- gas tax
- gls
- government funding
- government revenue
- government transportation expenditures
- government transportation revenue
- great lakes st. lawrence seaway development corporation
- great lakes-st. lawrence seaway
- gtfs
- high speed
- highway capacity
- highway corridors
- highway cost
- highway design
- highway materials
- highway safety
- highway traffic control
- highway transportation
- highway trust fund
- household spending
- human factors
- improvements
- index
- information dissemination
- integrated dynamic transit operations (idto)
- intellgence transportation system
- intelligent network flow optimization simulation
- intercity bus
- intermodelism
- land use
- level of service
- life cycle analysis
- local government
- marine
- messages (communications)
- methodology
- mexico
- mode choice
- motor carrier
- motor fuel
- natural gas pipeline
- ncfo
- ntl
- operator segment
- operators
- origin and destination
- paratransit
- passenger miles
- passenger transit
- passenger transportation services index
- passenger travel
- pavement management
- pedestrians
- performance
- pipeline petroleum
- pipeline transportation
- pipelines
- producer price index
- productivity
- programming (planning)
- prototypes
- r.e.s.c.u.m.e.
- rail freight carloads
- rail freight intermodal
- rail highway crossing
- rail transit
- reliability
- reports
- rescume
- research
- revenue
- revenues
- ridesharing
- road networks
- saint lawrence seaway
- sales tax
- satellite accounts
- seasonal
- seasonally-adjusted
- seat miles
- seaway
- sensors
- shrp2 project l02
- shrp2 project l03
- shrp2 project l07
- shrp2 project l08
- shrp2 project l14
- shrp2 project l33
- shrp2 project l38a
- shrp2 project l38b
- shrp2 project l38c
- shrp2 project l38d
- shrp2 project r11
- sls
- slsdc
- speed
- st. lawrence seaway
- state government
- state of the practice
- statistical analysis
- stimulus
- strategic highway research program 2 (shrp2)
- street
- tables (data)
- taxes
- ton miles
- traffic congestion
- traffic data
- traffic engineering
- traffic models
- traffic queuing
- traffic safety
- traffic simulation
- traffic surveillance
- trains
- transit trust fund
- transportation capital stock
- transportation expenditures
- transportation facilities
- transportation fare
- transportation finance
- transportation human factor
- transportation improvement projects
- transportation infrastructure
- transportation productivity
- transportation services
- transportation unemployment
- travel behavior
- travel surveys
- travel time variability
- traveler information and communication systems
- trend (statistics)
- trip length
- truck tonnage
- trust fund
- tunnels
- uncertainty
- unemployment
- urban highways
- urban renewal
- use
- validation
- value of transportation
- vehicle costs
- vehicle miles
- vessel transits
- work zone traffic control
- bridges
- cares act
- data
- dockless bikeshare
- e-scooters
- economic indicators
- economics
- employment
- formula funds
- freeways
- government
- highway operations
- highway travel
- inbound border crossing entries
- labor productivity
- microsimulation
- multifactor productivity
- noise
- personal vehicles
- pipeline
- port performance
- production
- route segment
- safety
- software
- statistics
- survey
- terminals
- tonnage
- traffic delays
- transit ridership
- transportation expenditure
- transportation investment
- transportation occupations
- trip purpose
- trucks
- waterways tonnage
- air carriers
- airlines
- airports
- bil
- census
- frieight trucking
- grants
- highway
- highways
- iija
- infrastructure
- nonrecurrent congestion
- performance measurement
- pilot studies
- public transit
- rail
- route
- segment
- terminal
- transportation and economy
- transportation assets
- transportation revenue
- transportation satellite accounts
- transportation services index
- transportation spending
- tsi
- vessels
- water
- air
- business practices
- contribution of transportation
- data analysis
- e-scooter
- intercity transportation
- port
- ports
- rural
- transportation workforce
- accessibility
- active transportation and demand management
- dynamic mobility applications
- maritime
- analysis modeling and simulation
- data collection
- docked bikeshare
- impact studies
- passenger
- passengers
- port of entry
- selection criteria
- simulation
- testbeds
- traffic flow
- transportation cost
- transportation employment
- travel demand
- commodity
- ferry operators
- ferry transit
- international trade
- mathematical models
- water transportation
- micromobility
- passenger ferry
- strategic planning
- bts
- bureau of transportation statistics
- fff
- freight facts & figures
- freight facts and figures
- freight transportation
- travel time
- travel time reliability
- exports
- imports
- strategic highway research program 2
- value
- weight
- transit
- transportation economics
- ferry
- bikeshare
- distance
- trip
- trips
- counties
- mobility
- states
- covid-19
- travel
- intelligent transportation systems
- freight
- state
- transportation
- monthly transportation statistics
- pocket guide to transportation
- national transit map
16 Results
filtered by
Tags > county
Clear All
Updated
August 24 2021
Views
5,491
Updates are delayed until July 2022 due to technical difficulties.
How many people are staying at home? How far are people traveling when they don’t stay home? Which states and counties have more people taking trips? The Bureau of Transportation Statistics (BTS) now provides answers to those questions through our new mobility statistics.
The Trips by Distance data and number of people staying home and not staying home are estimated for the Bureau of Transportation Statistics by the Maryland Transportation Institute and Center for Advanced Transportation Technology Laboratory at the University of Maryland. The travel statistics are produced from an anonymized national panel of mobile device data from multiple sources. All data sources used in the creation of the metrics contain no personal information. Data analysis is conducted at the aggregate national, state, and county levels. A weighting procedure expands the sample of millions of mobile devices, so the results are representative of the entire population in a nation, state, or county. To assure confidentiality and support data quality, no data are reported for a county if it has fewer than 50 devices in the sample on any given day.
Trips are defined as movements that include a stay of longer than 10 minutes at an anonymized location away from home. Home locations are imputed on a weekly basis. A movement with multiple stays of longer than 10 minutes before returning home is counted as multiple trips. Trips capture travel by all modes of transportation. including driving, rail, transit, and air.
The daily travel estimates are from a mobile device data panel from merged multiple data sources that address the geographic and temporal sample variation issues often observed in a single data source. The merged data panel only includes mobile devices whose anonymized location data meet a set of data quality standards, which further ensures the overall data quality and consistency. The data quality standards consider both temporal frequency and spatial accuracy of anonymized location point observations, temporal coverage and representativeness at the device level, spatial representativeness at the sample and county level, etc. A multi-level weighting method that employs both device and trip-level weights expands the sample to the underlying population at the county and state levels, before travel statistics are computed.
These data are experimental and may not meet all of our quality standards. Experimental data products are created using new data sources or methodologies that benefit data users in the absence of other relevant products. We are seeking feedback from data users and stakeholders on the quality and usefulness of these new products. Experimental data products that meet our quality standards and demonstrate sufficient user demand may enter regular production if resources permit.
Updated
June 10 2022
Views
40,730
Filtered View
How many people are staying at home? How far are people traveling when they don’t stay home? Which states and counties have more people taking trips? The Bureau of Transportation Statistics (BTS) now provides answers to those questions through our new mobility statistics.
The Trips by Distance data and number of people staying home and not staying home are estimated for the Bureau of Transportation Statistics by the Maryland Transportation Institute and Center for Advanced Transportation Technology Laboratory at the University of Maryland. The travel statistics are produced from an anonymized national panel of mobile device data from multiple sources. All data sources used in the creation of the metrics contain no personal information. Data analysis is conducted at the aggregate national, state, and county levels. A weighting procedure expands the sample of millions of mobile devices, so the results are representative of the entire population in a nation, state, or county. To assure confidentiality and support data quality, no data are reported for a county if it has fewer than 50 devices in the sample on any given day.
Trips are defined as movements that include a stay of longer than 10 minutes at an anonymized location away from home. Home locations are imputed on a weekly basis. A movement with multiple stays of longer than 10 minutes before returning home is counted as multiple trips. Trips capture travel by all modes of transportation. including driving, rail, transit, and air.
The daily travel estimates are from a mobile device data panel from merged multiple data sources that address the geographic and temporal sample variation issues often observed in a single data source. The merged data panel only includes mobile devices whose anonymized location data meet a set of data quality standards, which further ensures the overall data quality and consistency. The data quality standards consider both temporal frequency and spatial accuracy of anonymized location point observations, temporal coverage and representativeness at the device level, spatial representativeness at the sample and county level, etc. A multi-level weighting method that employs both device and trip-level weights expands the sample to the underlying population at the county and state levels, before travel statistics are computed.
These data are experimental and may not meet all of our quality standards. Experimental data products are created using new data sources or methodologies that benefit data users in the absence of other relevant products. We are seeking feedback from data users and stakeholders on the quality and usefulness of these new products. Experimental data products that meet our quality standards and demonstrate sufficient user demand may enter regular production if resources permit.
Updated
February 14 2022
Views
1,315
Filtered View
How many people are staying at home? How far are people traveling when they don’t stay home? Which states and counties have more people taking trips? The Bureau of Transportation Statistics (BTS) now provides answers to those questions through our new mobility statistics.
The Trips by Distance data and number of people staying home and not staying home are estimated for the Bureau of Transportation Statistics by the Maryland Transportation Institute and Center for Advanced Transportation Technology Laboratory at the University of Maryland. The travel statistics are produced from an anonymized national panel of mobile device data from multiple sources. All data sources used in the creation of the metrics contain no personal information. Data analysis is conducted at the aggregate national, state, and county levels. A weighting procedure expands the sample of millions of mobile devices, so the results are representative of the entire population in a nation, state, or county. To assure confidentiality and support data quality, no data are reported for a county if it has fewer than 50 devices in the sample on any given day.
Trips are defined as movements that include a stay of longer than 10 minutes at an anonymized location away from home. Home locations are imputed on a weekly basis. A movement with multiple stays of longer than 10 minutes before returning home is counted as multiple trips. Trips capture travel by all modes of transportation. including driving, rail, transit, and air.
The daily travel estimates are from a mobile device data panel from merged multiple data sources that address the geographic and temporal sample variation issues often observed in a single data source. The merged data panel only includes mobile devices whose anonymized location data meet a set of data quality standards, which further ensures the overall data quality and consistency. The data quality standards consider both temporal frequency and spatial accuracy of anonymized location point observations, temporal coverage and representativeness at the device level, spatial representativeness at the sample and county level, etc. A multi-level weighting method that employs both device and trip-level weights expands the sample to the underlying population at the county and state levels, before travel statistics are computed.
Pre-2020 backfill data are now available for all days going back through January 1, 2019.
Updated
February 14 2022
Views
478
Filtered View
How many people are staying at home? How far are people traveling when they don’t stay home? Which states and counties have more people taking trips? The Bureau of Transportation Statistics (BTS) now provides answers to those questions through our new mobility statistics.
The Trips by Distance data and number of people staying home and not staying home are estimated for the Bureau of Transportation Statistics by the Maryland Transportation Institute and Center for Advanced Transportation Technology Laboratory at the University of Maryland. The travel statistics are produced from an anonymized national panel of mobile device data from multiple sources. All data sources used in the creation of the metrics contain no personal information. Data analysis is conducted at the aggregate national, state, and county levels. A weighting procedure expands the sample of millions of mobile devices, so the results are representative of the entire population in a nation, state, or county. To assure confidentiality and support data quality, no data are reported for a county if it has fewer than 50 devices in the sample on any given day.
Trips are defined as movements that include a stay of longer than 10 minutes at an anonymized location away from home. Home locations are imputed on a weekly basis. A movement with multiple stays of longer than 10 minutes before returning home is counted as multiple trips. Trips capture travel by all modes of transportation. including driving, rail, transit, and air.
The daily travel estimates are from a mobile device data panel from merged multiple data sources that address the geographic and temporal sample variation issues often observed in a single data source. The merged data panel only includes mobile devices whose anonymized location data meet a set of data quality standards, which further ensures the overall data quality and consistency. The data quality standards consider both temporal frequency and spatial accuracy of anonymized location point observations, temporal coverage and representativeness at the device level, spatial representativeness at the sample and county level, etc. A multi-level weighting method that employs both device and trip-level weights expands the sample to the underlying population at the county and state levels, before travel statistics are computed.
These data are experimental and may not meet all of our quality standards. Experimental data products are created using new data sources or methodologies that benefit data users in the absence of other relevant products. We are seeking feedback from data users and stakeholders on the quality and usefulness of these new products. Experimental data products that meet our quality standards and demonstrate sufficient user demand may enter regular production if resources permit.
Updated
February 14 2022
Views
366
Filtered View
How many people are staying at home? How far are people traveling when they don’t stay home? Which states and counties have more people taking trips? The Bureau of Transportation Statistics (BTS) now provides answers to those questions through our new mobility statistics.
The Trips by Distance data and number of people staying home and not staying home are estimated for the Bureau of Transportation Statistics by the Maryland Transportation Institute and Center for Advanced Transportation Technology Laboratory at the University of Maryland. The travel statistics are produced from an anonymized national panel of mobile device data from multiple sources. All data sources used in the creation of the metrics contain no personal information. Data analysis is conducted at the aggregate national, state, and county levels. A weighting procedure expands the sample of millions of mobile devices, so the results are representative of the entire population in a nation, state, or county. To assure confidentiality and support data quality, no data are reported for a county if it has fewer than 50 devices in the sample on any given day.
Trips are defined as movements that include a stay of longer than 10 minutes at an anonymized location away from home. Home locations are imputed on a weekly basis. A movement with multiple stays of longer than 10 minutes before returning home is counted as multiple trips. Trips capture travel by all modes of transportation. including driving, rail, transit, and air.
The daily travel estimates are from a mobile device data panel from merged multiple data sources that address the geographic and temporal sample variation issues often observed in a single data source. The merged data panel only includes mobile devices whose anonymized location data meet a set of data quality standards, which further ensures the overall data quality and consistency. The data quality standards consider both temporal frequency and spatial accuracy of anonymized location point observations, temporal coverage and representativeness at the device level, spatial representativeness at the sample and county level, etc. A multi-level weighting method that employs both device and trip-level weights expands the sample to the underlying population at the county and state levels, before travel statistics are computed.
Pre-2020 backfill data are now available for all days going back through January 1, 2019.
Updated
February 14 2022
Views
267
How many people are staying at home? How far are people traveling when they don’t stay home? Which states and counties have more people taking trips? The Bureau of Transportation Statistics (BTS) now provides answers to those questions through our new mobility statistics.
The Trips by Distance data and number of people staying home and not staying home are estimated for the Bureau of Transportation Statistics by the Maryland Transportation Institute and Center for Advanced Transportation Technology Laboratory at the University of Maryland. The travel statistics are produced from an anonymized national panel of mobile device data from multiple sources. All data sources used in the creation of the metrics contain no personal information. Data analysis is conducted at the aggregate national, state, and county levels. A weighting procedure expands the sample of millions of mobile devices, so the results are representative of the entire population in a nation, state, or county. To assure confidentiality and support data quality, no data are reported for a county if it has fewer than 50 devices in the sample on any given day.
Trips are defined as movements that include a stay of longer than 10 minutes at an anonymized location away from home. Home locations are imputed on a weekly basis. A movement with multiple stays of longer than 10 minutes before returning home is counted as multiple trips. Trips capture travel by all modes of transportation. including driving, rail, transit, and air.
The daily travel estimates are from a mobile device data panel from merged multiple data sources that address the geographic and temporal sample variation issues often observed in a single data source. The merged data panel only includes mobile devices whose anonymized location data meet a set of data quality standards, which further ensures the overall data quality and consistency. The data quality standards consider both temporal frequency and spatial accuracy of anonymized location point observations, temporal coverage and representativeness at the device level, spatial representativeness at the sample and county level, etc. A multi-level weighting method that employs both device and trip-level weights expands the sample to the underlying population at the county and state levels, before travel statistics are computed.
These data are experimental and may not meet all of our quality standards. Experimental data products are created using new data sources or methodologies that benefit data users in the absence of other relevant products. We are seeking feedback from data users and stakeholders on the quality and usefulness of these new products. Experimental data products that meet our quality standards and demonstrate sufficient user demand may enter regular production if resources permit.
Updated
February 14 2022
Views
207
How many people are staying at home? How far are people traveling when they don’t stay home? Which states and counties have more people taking trips? The Bureau of Transportation Statistics (BTS) now provides answers to those questions through our new mobility statistics.
The Trips by Distance data and number of people staying home and not staying home are estimated for the Bureau of Transportation Statistics by the Maryland Transportation Institute and Center for Advanced Transportation Technology Laboratory at the University of Maryland. The travel statistics are produced from an anonymized national panel of mobile device data from multiple sources. All data sources used in the creation of the metrics contain no personal information. Data analysis is conducted at the aggregate national, state, and county levels. A weighting procedure expands the sample of millions of mobile devices, so the results are representative of the entire population in a nation, state, or county. To assure confidentiality and support data quality, no data are reported for a county if it has fewer than 50 devices in the sample on any given day.
Trips are defined as movements that include a stay of longer than 10 minutes at an anonymized location away from home. Home locations are imputed on a weekly basis. A movement with multiple stays of longer than 10 minutes before returning home is counted as multiple trips. Trips capture travel by all modes of transportation. including driving, rail, transit, and air.
The daily travel estimates are from a mobile device data panel from merged multiple data sources that address the geographic and temporal sample variation issues often observed in a single data source. The merged data panel only includes mobile devices whose anonymized location data meet a set of data quality standards, which further ensures the overall data quality and consistency. The data quality standards consider both temporal frequency and spatial accuracy of anonymized location point observations, temporal coverage and representativeness at the device level, spatial representativeness at the sample and county level, etc. A multi-level weighting method that employs both device and trip-level weights expands the sample to the underlying population at the county and state levels, before travel statistics are computed.
These data are experimental and may not meet all of our quality standards. Experimental data products are created using new data sources or methodologies that benefit data users in the absence of other relevant products. We are seeking feedback from data users and stakeholders on the quality and usefulness of these new products. Experimental data products that meet our quality standards and demonstrate sufficient user demand may enter regular production if resources permit.
Updated
February 14 2022
Views
229
Filtered View
How many people are staying at home? How far are people traveling when they don’t stay home? Which states and counties have more people taking trips? The Bureau of Transportation Statistics (BTS) now provides answers to those questions through our new mobility statistics.
The Trips by Distance data and number of people staying home and not staying home are estimated for the Bureau of Transportation Statistics by the Maryland Transportation Institute and Center for Advanced Transportation Technology Laboratory at the University of Maryland. The travel statistics are produced from an anonymized national panel of mobile device data from multiple sources. All data sources used in the creation of the metrics contain no personal information. Data analysis is conducted at the aggregate national, state, and county levels. A weighting procedure expands the sample of millions of mobile devices, so the results are representative of the entire population in a nation, state, or county. To assure confidentiality and support data quality, no data are reported for a county if it has fewer than 50 devices in the sample on any given day.
Trips are defined as movements that include a stay of longer than 10 minutes at an anonymized location away from home. Home locations are imputed on a weekly basis. A movement with multiple stays of longer than 10 minutes before returning home is counted as multiple trips. Trips capture travel by all modes of transportation. including driving, rail, transit, and air.
The daily travel estimates are from a mobile device data panel from merged multiple data sources that address the geographic and temporal sample variation issues often observed in a single data source. The merged data panel only includes mobile devices whose anonymized location data meet a set of data quality standards, which further ensures the overall data quality and consistency. The data quality standards consider both temporal frequency and spatial accuracy of anonymized location point observations, temporal coverage and representativeness at the device level, spatial representativeness at the sample and county level, etc. A multi-level weighting method that employs both device and trip-level weights expands the sample to the underlying population at the county and state levels, before travel statistics are computed.
Pre-2020 backfill data are now available for all days going back through January 1, 2019.
Updated
February 14 2022
Views
161
Filtered View
How many people are staying at home? How far are people traveling when they don’t stay home? Which states and counties have more people taking trips? The Bureau of Transportation Statistics (BTS) now provides answers to those questions through our new mobility statistics.
The Trips by Distance data and number of people staying home and not staying home are estimated for the Bureau of Transportation Statistics by the Maryland Transportation Institute and Center for Advanced Transportation Technology Laboratory at the University of Maryland. The travel statistics are produced from an anonymized national panel of mobile device data from multiple sources. All data sources used in the creation of the metrics contain no personal information. Data analysis is conducted at the aggregate national, state, and county levels. A weighting procedure expands the sample of millions of mobile devices, so the results are representative of the entire population in a nation, state, or county. To assure confidentiality and support data quality, no data are reported for a county if it has fewer than 50 devices in the sample on any given day.
Trips are defined as movements that include a stay of longer than 10 minutes at an anonymized location away from home. Home locations are imputed on a weekly basis. A movement with multiple stays of longer than 10 minutes before returning home is counted as multiple trips. Trips capture travel by all modes of transportation. including driving, rail, transit, and air.
The daily travel estimates are from a mobile device data panel from merged multiple data sources that address the geographic and temporal sample variation issues often observed in a single data source. The merged data panel only includes mobile devices whose anonymized location data meet a set of data quality standards, which further ensures the overall data quality and consistency. The data quality standards consider both temporal frequency and spatial accuracy of anonymized location point observations, temporal coverage and representativeness at the device level, spatial representativeness at the sample and county level, etc. A multi-level weighting method that employs both device and trip-level weights expands the sample to the underlying population at the county and state levels, before travel statistics are computed.
Pre-2020 backfill data are now available for all days going back through January 1, 2019.
Updated
February 14 2022
Views
158
Showing 1 to 10 of 16 results