This project focused specifically on design treatments that can be used to improve travel time reliability. The objectives of this research were to (1) identify the full range of possible roadway design features used by transportation agencies to improve travel time reliability and reduce delays from key causes of nonrecurrent congestion, (2) assess their costs and operational and safety effectiveness, and (3) provide recommendations for their use and eventual incorporation into appropriate design guides. This research generated two companion products that allow transportation agencies and professionals to apply these research findings effectively in daily practice. These products are the Design Guide for Addressing Nonrecurrent Congestion, which is a catalogue of the design elements and their associated use information, and the Analysis Tool for Design Treatments to Address Nonrecurring Congestion, which is a tool to execute the various analysis procedures and models to measure the effectiveness of a design element on travel time reliability. This zip file contains comma separated value (.csv) files of data to support SHRP 2 Report S2-L07-RR-1, Identification and Evaluation of the Cost-Effectiveness of Highway Design Features to Reduce Nonrecurrent Congestion, https://rosap.ntl.bts.gov/view/dot/4040 The compressed zip file is 12 MB. These files can be unzipped using any zip compression/decompression software. The .csv files can be read with any basic text editor.

This zip file contains POSTDATA.ATT (.ATT); Print to File (.PRN); Portable Document Format (.PDF); and document (.DOCX) files of data to support FHWA-JPO-16-385, Analysis, modeling, and simulation (AMS) testbed development and evaluation to support dynamic mobility applications (DMA) and active transportation and demand management (ATDM) programs — evaluation report for ATDM program. Zip size is 168 MB. Files were accessed in 2017. Data will be preserved as is.

The datasets in this zip file are in support of Intelligent Transportation Systems Joint Program Office (ITS JPO) report FHWA-JPO-16-385, "Analysis, Modeling, and Simulation (AMS) Testbed Development and Evaluation to Support Dynamic Mobility Applications (DMA) and Active Transportation and Demand Management (ATDM) Programs — Evaluation Report for ATDM Program," https://rosap.ntl.bts.gov/view/dot/32520 and FHWA-JPO-16-373, "Analysis, modeling, and simulation (AMS) testbed development and evaluation to support dynamic mobility applications (DMA) and active transportation and demand management (ATDM) programs : Dallas testbed analysis plan," https://rosap.ntl.bts.gov/view/dot/32106 The files in this zip file are specifically related to the Dallas Testbed. The compressed zip files total 2.2 GB in size. The files have been uploaded as-is; no further documentation was supplied by NTL. All located .docx files were converted to .pdf document files which are an open, archival format. These pdfs were then added to the zip file alongside the original .docx files. These files can be unzipped using any zip compression/decompression software. This zip file contains files in the following formats: .pdf document files which can be read using any pdf reader; .cvs text files which can be read using any text editor; .txt text files which can be read using any text editor; .docx document files which can be read in Microsoft Word and some other word processing programs; . xlsx spreadsheet files which can be read in Microsoft Excel and some other spreadsheet programs; .dat data files which may be text or multimedia; as well as GIS or mapping files in the fowlling formats: .mxd, .dbf, .prj, .sbn, .shp., .shp.xml; which may be opened in ArcGIS or other GIS software. [software requirements] These files were last accessed in 2017.

The datasets in this zip file are in support of FHWA-JPO-16-379, Analysis, Modeling, and Simulation (AMS) Testbed Development and Evaluation to Support Dynamic Mobility Applications (DMA) and Active Transportation and Demand Management (ATDM) Programs - calibration Report for Phoenix Testbed : Final Report. The compressed zip file totals 1.1 GB in size. The zip file have been uploaded as-is; no further documentation was supplied by NTL, excepted as noted: All located .docx files were converted to .pdf document files which are an archival format. These .pdfs were then added to the zip file alongside the original .docx files. The initial zip file presented to NTL contained uncompressed datasets and duplicative zip files of the files. In order to make the overall size of the this zip file more manageable, duplicative files were deleted. The zip file can be unzipped using any zip compression/decompression software. This zip file contains files in the following formats: .pdf document files which can be read using any pdf reader; .cvs text files which can be read using any text editor; .docx document files which can be read in Microsoft Word and some other word processing programs; .txt text files which can be opened with any text editor; .xlsx spreadsheet files which can be read in Microsoft Excel and some other spreadsheet programs; .cfg computer configuration files; .db database files, which can be opened with many database programs; .rif raster image files, these files may have been created by the Corel Painter image editing application, a proprietary software program, although other image programs may open the files [software requirements]. These files were last accessed in 2017.

The datasets in this zip file are in support of Intelligent Transportation Systems Joint Program Office (ITS JPO) report FHWA-JPO-16-385, "Analysis, Modeling, and Simulation (AMS) Testbed Development and Evaluation to Support Dynamic Mobility Applications (DMA) and Active Transportation and Demand Management (ATDM) Programs — Evaluation Report for ATDM Program," and FHWA-JPO-16-389, "Analysis, Modeling, and Simulation (AMS) Testbed Development and Evaluation to Support Dynamic Mobility Applications (DMA) and Active Transportation and Demand Management (ATDM) Programs : Evaluation Report for the San Diego Testbed : Draft Report". The files in this zip file are specifically related to the San Diego Testbed. The compressed zip files total 3.17 GB in size. The files have been uploaded as-is; no further documentation was supplied by NTL. Direct download of data zip file: https://doi.org/10.21949/1500873 All located .docx files were converted to .pdf document files which are an open, archival format. These pdfs were then added to the zip file alongside the original .docx files. These files can be unzipped using any zip compression/decompression software. This zip file contains files in the following formats: .pdf document files which can be read using any pdf reader; .cvs text files which can be read using any text editor; .txt text files which can be read using any text editor; .docx document files which can be read in Microsoft Word and some other word processing programs; . xlsx spreadsheet files which can be read in Microsoft Excel and some other spreadsheet programs; .dat data files which may be text or multimedia; as well as GIS or mapping files in the following formats: .mxd, .dbf, .prj, .sbn, .shp., .shp.xml; which may be opened in ArcGIS or other GIS software. [software requirements] These files were last accessed in 2017.

The datasets in this zip file are in support of Intelligent Transportation Systems Joint Program Office (ITS JPO) report FHWA-JPO-16-385, \"Analysis, Modeling, and Simulation (AMS) Testbed Development and Evaluation to Support Dynamic Mobility Applications (DMA) and Active Transportation and Demand Management (ATDM) Programs — Evaluation Report for ATDM Program,\" https://rosap.ntl.bts.gov/view/dot/32520 and FHWA-JPO-16-388, \"Analysis, Modeling, and Simulation (AMS) Testbed Development and Evaluation to Support Dynamic Mobility Applications (DMA) and Active Transportation and Demand Management (ATDM) Programs — Evaluation Summary for the Chicago Testbed,\" https://rosap.ntl.bts.gov/view/dot/34269 \n\nThe files in this zip file are specifically related to the Chicago Testbed.\n\nThe compressed zip files total 1.6 GB in size. The files have been uploaded as-is; no further documentation was supplied by NTL. All located .docx files were converted to .pdf document files which are an open, archival format. These pdfs were then added to the zip file alongside the original .docx files.\n\nThese files can be unzipped using any zip compression/decompression software. \n\nThis zip file contains files in the following formats: \n.pdf document files which can be read using any pdf reader;\n.cvs text files which can be read using any text editor;\n.txt text files which can be read using any text editor;\n.docx document files which can be read in Microsoft Word and some other word processing programs;\n. xlsx spreadsheet files which can be read in Microsoft Excel and some other spreadsheet programs;\n.dat data files which may be text or multimedia;\nas well as GIS or mapping files in the fowlling formats: .mxd, .dbf, .prj, .sbn, .shp., .shp.xml; which may be opened in ArcGIS or other GIS software.\n[software requirements]\n\nThese files were last accessed in 2017.

This zip file contains files of data to support FHWA-JPO-16-370, Analysis, Modeling, and Simulation (AMS) Testbed Development and Evaluation to Support Dynamic Mobility Applications (DMA) and Active Transportation and Demand Management (ATDM) Programs - San Mateo Testbed Analysis Plan : Final Report. Zip size is 1.5 GB. The files have been uploaded as-is; no further documentation was supplied by NTL. All located .docx files were copied to .pdf document files which are an archival format. These .pdfs were then added to the zip file alongside the original .docx files. The attached zip files can be unzipped using any zip compression/decompression software. These zip file contains files in the following formats: .pdf document files which can be read using any pdf reader; .docx document files which may be opened with Microsoft Word or some other open source document editors; .xlsx spreadsheet files which may be opened with Microsoft Excel or some other open source spreadsheet editors; .syn files are a proprietary file format for signal timing plans which are provided in the Synchro Model given as “El Camino Real Synchro.syn” and can be opened using Trafficware Synchro, which may require users to purchase a license or software (for more information go to http://www.trafficware.com/); .csv data files, an open format, which may be opened with any text editor or in many spreadsheet applications; .db generic database files, often associated with thumbnail images in the Windows operating environment; .rbc files, which are scripts written in Rembo-C, which can be opened in a text editor, but require a server with Rembo installed to run the scripts; .vap audio files which will require special audio editing software to manipulate; .dll dynamically linked files for Windows program operations; .layx, a file type on which we could not locate reliable information; and .inpx files, a file type on which we could not locate reliable information [software requirements]. These files were last accessed in 2017. Files were accessed in 2017. Data will be preserved as is.